Canon SX80 MarK II Manuel D’Utilisation
19
Safety Instructions
Sa
fe
ty
Ins
truc
tions
truc
tions
Carrying/Transporting the Projector
Installation Precautions
Disposal of Waste Lamp
• Dispose of the projector's mercury lamp according to local regulations just
• Dispose of the projector's mercury lamp according to local regulations just
like the fluorescent lamps.
• This projector is a precision machine. Do not subject the projector to strong
shocks or vibrations or turn it down.
• Install the lens cap to protect the lens and put the projector in the carrying
bag to protect it from dust and scratches on the surface of it when you carry
the projector. For details, see
the projector. For details, see
• Wait until the cooling fan stops before putting the projector in the carrying
bag. Do not put the projector in the carrying bag until the cooling fan stops
rotating. The projector may be damaged due to the heat.
rotating. The projector may be damaged due to the heat.
• Replace the adjustable foot before putting the projector in the carrying bag.
The projector may be damaged if you put it in the bag without replacing the
adjustable foot.
adjustable foot.
• The carrying bag is not designed to protect the projector from external
shocks. When carrying the projector with it put in the carrying bag, do not
give a shock to it, drop it, or place anything on it. The projector may be dam-
aged or malfunctioned.
give a shock to it, drop it, or place anything on it. The projector may be dam-
aged or malfunctioned.
• Do not transport the projector through a courier or transport service with the
carrying bag. Put the projector in an impact-resistant transport case if such is
the case.
the case.
The area around the exhaust vent and the cabinet above the exhaust vent
become hot when the projector is operating.
• Do not touch these areas, or you may get burnt. In particular, keep children
become hot when the projector is operating.
• Do not touch these areas, or you may get burnt. In particular, keep children
away from these areas. Do not put anything that may deform or discolor due
to heat on the projector.
to heat on the projector.
Hot air is exhausted from the exhaust vent. Observe
the following:
• Do not put any metallic object on the projector. It
the following:
• Do not put any metallic object on the projector. It
may become hot, resulting in accident or injury.
• Do not seat anyone near the exhaust vent. Other-
wise, you may get burned.
When placing the projector on a castered stand or table, be sure to lock the
casters.
• Failure to do so may cause the projector to move or topple, resulting in an
casters.
• Failure to do so may cause the projector to move or topple, resulting in an
injury.
Caution
Caution
Caution
Hot air