Canon SX80 MarK II Manuel D’Utilisation

28

KEYSTONE button
Corrects keystone distortion. (

)

[ ] [ ]: For keystone adjustment.
Press KEYSTONE and then AUTO SET to 
adjust the keystone automatically.

• Moves the image up and down when 

the D. image shift is selected. (

)

• [ ] [ ]: Adjust the vertical position.

<

<

<

<

MENU button (

)

Displays a menu on the screen.

AUTO SET button (

Performs input signal setting, 
keystone distortion adjust-
ment, focusing (SX80 II), and 
screen color correction (SX80 
II) automatically.

FOCUS button (

Adjusts focusing.
[ ] [ ]: For rough adjustment.
[<] [>]: For fine adjustment.
In SX80 MarkII, press FOCUS and 
then AUTO SET to adjust the focus 
automatically.

<

<

ZOOM button (

)

Adjusts the image size.
[ ] [ ]: For rough adjust-

ment.

[<] [>]: For fine adjustment.

<

<

OK button (

)

Determines the item se-
lected from the menu.

INPUT button (

)

Switches among input signals.

WARNING lamp (

)

Flashes red when a problem has been 
detected on the projector.

POWER button/lamp (

Turns the projector on or off.
Green: The projector is on.
Flashing green: The projector is be-
ing turned on.
Red: The projector can be turned on.
Flashing red: The projector is being 
turned off (the lamp is being cooled).

Pointer/VOL button (

Adjusts the sound volume.
[<]: Decreases the volume.
[>]: Increases the volume.
Selects the upper, lower, left or 
right item in the menu.

AUTO PC button (

Adjusts tracking and so on automatical-
ly in accordance with signal from a 
computer when ANALOG PC-1 or ANA-
LOG PC-2 is selected.

LED illumination lamp (

Indicates the projector status with LEDs.
Blinking from the left: The projector is being turned on.
Blinking from the right: The projector is being turned off.
Middle LED flashing slowly: The image is being blanked out.
Left and right LEDs flashing slowly: The image is freezing.