Canon SX80 MarK II Manuel D’Utilisation

Setting Display Status

Adjust Input Signal (ANALOG PC) – Vertical
pixels

[Input signal settings] - [Vertical pixels]

You can adjust the number of the pixels in
the vertical direction if the length of the
screen is too long or too short in the verti-
cal direction.

Use [<] / [>] to select a value.

When you have completed the adjust-
ment, press the MENU button.

• Perform this adjustment if the [AUTO

PC] function (

P57

) cannot adjust the

project image correctly.

• You can make adjustment either for

[ANALOG PC-1] or [ANALOG PC-2].

Selecting HDMI Input Level (SX80 II)

[HDMI input level]

You can select this as required when you
project visual software with the HDMI sig-
nals.

Press the OK button to accept your setting
and then press the MENU button.

• [Auto] is the factory default.
• You can select this only when the type of

signal sent from AV equipment is RGB.

• The signal level is select automatically in

[Auto] mode. (Some AV equipment may
not support this.)

• If the HDMI output of your AV equipment

allows switching between [Normal] and
[Expanded], we recommend you to set
[Expanded]. The contrast of images will
be improved and dark scenes will be
rendered more realistically. In this case,
select [Auto] or [Expanded] for the
HDMI input level.
For more detailed information, refer to
the User's Manual of your AV equipment
connected to the projector.

HDMI

COMPONENT

DIGITAL PC

VIDEO/S-VIDEO

ANALOG PC

USB

Input signal settings

Display settings

Vertical pixels