Canon WUX450 Manuel D’Utilisation

Page de 308
118
Customizing System Operation (System Settings)
Resetting the Air Filter 
Counter
> [System settings] > [Other settings] >
 
[Air filter counter]
This resets the counter which 
reminds you of the time for cleaning 
and replacing the air filter.
To view the air filter counter, press the 
OK button when [Air filter counter] is 
selected.
Select [Reset] and press the OK button.
To reset the air filter counter, select 
[Yes] on the confirmation screen and 
press the OK button.
Press the MENU button or EXIT button.
Updating the 
Firmware
> [System settings] > [Other settings] >
 
[Firmware]
Use a firmware update program 
stored on a USB flash drive to 
update the projector firmware.
Download firmware updates from the 
Canon website and store them at the 
root directory on the USB flash 
drive.
Select [Firmware], press the OK button, 
and check the firmware version 
displayed. Selecting [OK] will display an 
update confirmation screen. To update 
the firmware, select [Yes].
Firmware updating takes about three 
minutes. During the update, the LED 
indicator will flash in red. Do not turn off 
the projector while the LED is flashing.
After the update, the projector will 
automatically turn itself off and enter 
standby mode.
HDMI
Component
LAN
Digital PC
Analog PC
USB
For details about how to replace or 
clean the filter, refer to 
.
HDMI
Component
LAN
Digital PC
Analog PC
USB
• In some cases, it may not be 
possible to download the update. If 
so, contact the Canon Customer 
Support Center.
• This firmware version is for 
illustration only, and the actual 
number will be different.