Canon WUX450 Manuel D’Utilisation
181
Completing Computer Settings
Inst
alla
tio
alla
tio
n
an
d Main
d Main
te
na
nce
Con
necting
to a Networ
k
Item
Explanation
Factory default setting
Password
User name
User name
When logging into the web
screen, enter the user name
in 1-byte alphanumeric
characters and symbols (4 -
15 characters).
screen, enter the user name
in 1-byte alphanumeric
characters and symbols (4 -
15 characters).
root
New password
When logging into the web
screen, enter the password in
1-byte alphanumeric
characters and symbols (4 -
15 characters).
screen, enter the password in
1-byte alphanumeric
characters and symbols (4 -
15 characters).
system
Confirm new password
For confirmation, enter the
same password that you
entered in [New password].
same password that you
entered in [New password].
system
TCP/IP
DHCP
DHCP
Select whether to turn the
DHCP function on or off. If the
function is on, because the IP
address is acquired from the
server, it is not possible to
enter the [IP address],
[Subnet mask], and [Default
gateway].
DHCP function on or off. If the
function is on, because the IP
address is acquired from the
server, it is not possible to
enter the [IP address],
[Subnet mask], and [Default
gateway].
OFF
IP address
Enter the IP address of the
projector in 1-byte numbers.
projector in 1-byte numbers.
192.168.254.254
Subnet mask
Enter the subnet mask in 1-
byte numbers.
byte numbers.
255.255.255.0
Default gateway
Enter the default gateway IP
address in 1-byte numbers.
address in 1-byte numbers.
0.0.0.0
If settings related to TCP/IP were changed, it is necessary to disconnect and reconnect to
the network.
If the network subnet mask was changed, select [Subnet mask] in the above screen and
set the new subnet mask.
the network.
If the network subnet mask was changed, select [Subnet mask] in the above screen and
set the new subnet mask.