Canon LV-8320 Manuel D’Utilisation

19

This  projector  uses  nominal  input  voltages  of 

100-240  V AC  and  it  automatically  selects  the 

correct input voltage. It is designed to work with 

single-phase power systems having a grounded 

neutral conductor. To reduce the risk of electrical 

shock, do not plug into any other type of power 

system.

If  you  are  not  sure  of  the  type  of  power  being 

supplied,  consult  your  authorized  dealer  or 

service center.

Connect  the  projector  with  all  peripheral 

equipment before turning the projector on.

To the AC outlet.

To power cord 

connector on your 

projector.

To the AC outlet.

To the AC outlet.

Ground





Ground

The AC outlet must be near this equipment 

and must be easily accessible.

  

Connect  the AC  power  cord 

(supplied) to the projector.



Note:

   

Unplug the AC power cord when the projector is not in use.  When this projector  is connected 

   to an outlet with the AC power cord, it is in Stand-by mode and consumes a little electric power.

AC power cord must meet requirement of the country where you use the projector.

Confirm the AC plug type with the chart below and proper AC power cord must be used.

If supplied AC power cord does not match your AC outlet, contact your sales dealer.