Canon LV-8320 Manuel D’Utilisation

30

This projector automatically tunes to various types of computers with its Multi-scan system and Auto 

PC Adjustment. If a computer is selected as a signal source, this projector automatically detects the 

signal format and tunes to project a proper image without any additional settings. (Signal formats 

provided in this projector are shown on page 73-74.)

One of the following messages may appear when:

When the projector cannot recognize 

the connected signal conforming to 

the provided PC systems, 

Auto is 

displayed on the System Menu box 

and the Auto PC Adjustment function 

works to display proper images. If 

the image is not projected properly, 

a manual adjustment is required (pp. 

32-33).
There is no signal input from the 

computer. Check the connection 

between your computer and the 

projector. (See “Troubleshooting” on 

pp. 67-69)

The preset system is manually 

adjusted in the PC adjust Menu. The 

adjusted data can be stored in 

1-10 (pp. 32-33).

PC Systems provided in this projector 

is chosen. The projector chooses 

a proper system provided in the 

projector and displays it.  

*

Mode 1 and SVGA 1 are examples.  

PC system can also be selected manually.

Selecting Computer System Manually

Press the MENU button to display the 

On-Screen Menu. Use the Point ▲▼ buttons 

to select 

Input and then press the Point ► 

button or the OK button.

Use the Point ▲▼ buttons to select 

System 

and then press the Point ► button or the OK 

button.

Use the Point ▲▼ buttons to select the 

desired system and then press the OK button.

Selected system in 

the PC System Menu 

is displayed.

Systems in this dialog box 

can be selected.

Customized 

(1–10) set in the PC 

adjust Menu (pp. 

32-33).