Canon LV-8320 Manuel D’Utilisation

65

When the projection lamp of the projector 

reaches its end of life, the Lamp replacement 

icon appears on the screen and LAMP 

REPLACE indicator lights yellow. Replace the 

lamp with a new one promptly. The timing when 

the LAMP REPLACE indicator should light is 

depending on the lamp mode.

For continued safety, replace with a lamp of 

the same type. Do not drop a lamp or touch 

a glass bulb! The glass can shatter and may 

cause injury.

Allow a projector to cool for at least one hour 

before you open the Lamp Cover. The inside 

of the projector can become very hot.

When replacing the lamp because it has stopped illuminating, there is a possibility that the lamp 

may be broken.

If replacing the lamp of a projector which has been installed on the ceiling, you should always 

assume that the lamp is broken, and you should stand to the side of the lamp cover, not 

underneath it. Remove the lamp cover gently. Small pieces of glass may fall out when the 

lamp cover is opened. If pieces of glass get into your eyes or mouth, seek medical advice 

immediately.



 •  The Lamp replacement icon will not appear when the Display function is set to 

Off (p.48), during Freeze 

(p.27), or 

Blank (p.28).

 •  When Mode 2 is selected in the Lamp life control menu, if the projection lamp of the projector reaches its 

        end of life, the lamp replacement icon appears on the screen, and the projector is turned off automatically 

        after 3 minutes.

Follow these steps to replace the lamp.

Unplug the AC power cord. Let the 

projector cool for at least one hour.

Loosen the three (3) screws that secure 

the lamp. Lift the lamp out of the projector 

by using the handle.

Replace the lamp with a new one and 

secure the three (3) screws. Make sure 

that the lamp is set properly. Close the 

lamp cover and secure the screw.

Loosen the screw and open the lamp cover.

Connect the AC power cord to the 

projector and turn on the projector.

Lamp

Handles

Screw

Lamp Cover

Screw

Screw

Screw