Canon LV-8320 Manuel D’Utilisation

8

Openings in the cabinet are provided for 

ventilation. To ensure reliable operation of the 

product and to protect it from overheating, these 

openings must not be blocked or covered. 

 

Hot air is exhausted from the exhaust vent. When 

using or installing the projector, the following 

precautions should be taken. 

–  Do not put any flammable object or spray can 

near the projector, hot air is exhausted from the 

ventilation holes.

–  Keep the exhaust vent at least 3’ (1 m) away 

from any objects.

– Do not touch a peripheral part of the exhaust 

vent, especially screws and metallic parts. 

These areas will become hot while the 

projector is being used.

– Do not put anything on the cabinet. Objects put 

on the cabinet will not only get damaged but 

also may cause fire hazard by heat.

– Make sure that there is no object under the 

projector to prevent from covering the bottom 

openings.

Cooling fans are provided to cool down the 

projector. The fans’ running speed is changed 

according to the temperature inside the projector.

When moving the projector, replace the lens cap 

and retract adjustable feet to prevent damage to 

the lens and cabinet.

When the projector is not in use for an extended 

period, put it into the supplied carrying case with 

the lens side up.

Do not pitch the projector more 

than 40 degrees from above and 

below.

Do not point the projector up to 

project an image.

Do not point the projector down to 

project an image. 

Do not put the projector on either 

side to project an image. 

Install the projector properly. Improper installation 

may reduce the lamp life and cause a fire hazard.

Do not roll the projector more 

than 20 degrees from side to 

side.

20°

20°

–  Do not drop or bump the projector, otherwise 

damages or malfunctions may result.

–   When carrying the projector, use a suitable 

carrying case.

–  Do not transport the projector by courier or 

any other transport service in an unsuitable 

transport case. This may cause damage to the 

projector. For information about transporting 

the projector by courier or any other transport 

service, consult your dealer.

–  Do not put the projector in a case before the 

projector is cooled enough

.

Air Intake Vent

Exhaust Vent

(Hot air exhaust)

Exhaust Vent

(Hot air exhaust)

Air intake Vent

The carrying case (supplied) is intended for 

protection against dust and scratches on surface 

of the cabinet, and it is not designed to protect 

an appliance from external forces. Do not 

transport the projector by courier or any other 

transport service with this case, otherwise the 

projector can be damaged. When handling the 

projector, do not drop, bump, subject it to strong 

forces, or put other things on the cabinet.

40°

40°

Air intake Vent