Canon LV-7490 Manuel D’Utilisation

20

The preparation display will disappear after 30 

seconds.

(See page 54 for Lamp mode status.)

Connect the projector’s AC power cord into 

an AC outlet. The POWER indicator lights 

red. Open the lens cap.
Press the POWER button on the top 

control or on the remote controller. 

The POWER indicator lights green and 

the cooling fans start to operate. The 

preparation display appears on the screen 

and the countdown starts. 

Complete peripheral connections (with a 

computer, VCR, etc.) before turning on the 

projector.  



The Filter warning and Lamp replacement icons may 

appear on the screen depending on the usage state 

of the projector.

After the countdown, the input source that 

was selected the last time and the Lamp 

mode status icon (p.54) appear on the 

screen.



  •  When the Logo select function is set to 

Off, the 

logo will not be shown on the screen (p.48).

  •  When 

Countdown off or Off is selected in the 

Display function, the preparation display will not 

be shown on the screen (p.48).

  •  When the Auto input function is set to 

On 2, the 

input signal will be searched automatically (p.47).

  •  When 

Off is selected in the Display function, the 

VIDEO/PC selection window and the input signal 

guidance window are not shown on the screen 

(p.48).

If there is no signal input when start on the 

projector, or the current signal is missed 

while operating the projector, the VIDEO/

PC selection window will be displayed 

on the screen, please move the pointer 

to input source desired by pressing the 

Point ▲▼ buttons and press the OK 

button. And then follow the input signal 

guidance window to correct the signal and 

connection.

If the projector is locked with a PIN code, 

PIN code input dialog box will appear. Enter 

the PIN code as instructed on the next 

page.

Lamp mode status

16