Canon LV-7490 Manuel D’Utilisation

50

Use the Point ▲▼ buttons to enter a number. 

Press the Point ◄► buttons to fix the number 

and move the red frame pointer to the next 

box. The number changes to . If you fixed an 

incorrect number, use the Point ◄► buttons 

to move the pointer to the number you want to 

correct, and then enter the correct number.
Repeat this step to complete entering a four-digit 

number.
After entering the four-digit number, move the 

pointer to 

Set. Press the OK button so that you 

can start to operate the projector.
If you entered an incorrect Logo PIN code, 

PIN code and the number () will turn red 

for a moment. Enter the correct Logo PIN code 

all over again.

Logo PIN code can be changed to your desired 

four-digit number. Press the OK button to select 

Logo PIN code change. Current logo PIN code

dialog box appears, use the Point ▲▼buttons to 

enter the current code. The New Logo PIN code 

input dialog box appears. Set a new Logo PIN code, 

confirmation box appears, choose 

Yes to set the 

new Logo PIN code.
Be sure to note the new Logo PIN code and keep it 

on hand. If you lost the number, you could no longer 

change the Logo PIN code setting. 

Use the Point ▲▼ buttons to switch 

On or Off, 

and then press the OK button to make a choice.

After a correct Logo PIN code 

is entered, the following dialog 

box appears.



If you forget your Logo PIN code and unable to change 

it, the Logo PIN code can be reset to the factory default 

setting (4321) according to the following procedures.

When you reset the Logo PIN code, the PIN code and 

Key lock will be reset, as well.

1. Unplug the AC Power Cord from the AC outlet.

2. Hold down the OK button on the projector and 

connect the AC Power Cord into the outlet again. 

Keep holding down the OK button until the POWER 

indicator lights. The Logo PIN code returns to the 

factory default setting while the Logo PIN code lock 

state will remain the same as the previous set state.