Benq SH910 Manuel D’Utilisation
Operation
29
Magnifying and searching for details
If you need to find the details on the projected picture, magnify the picture. Use the
direction arrow keys for navigating the picture.
direction arrow keys for navigating the picture.
•
Using the remote control
1.
Press ZOOM+/ZOOM- to display the Zoom bar.
2.
Press ZOOM + to magnify the center of the picture.
Press the key repeatedly until the picture size is
suitable for your need.
Press the key repeatedly until the picture size is
suitable for your need.
3.
Use the directional arrows ( ,
,
,
) on the
projector or remote control to navigate the picture.
4.
To restore the picture to its original size, press AUTO.
You can also press ZOOM -. When the key is pressed
again, the picture is further reduced until it is restored
to the original size.
You can also press ZOOM -. When the key is pressed
again, the picture is further reduced until it is restored
to the original size.
•
Using the OSD menu
1.
Press MENU/EXIT and then press
/
until the DISPLAY menu is highlighted.
2.
Press
to highlight Digital Zoom and press MODE/ENTER. The Zoom bar displays.
3.
Repeat steps 2-4 in the section of
above. Or if you are using
the projector control panel, continue to the following steps.
4.
Press on the projector repeatedly to magnify the picture to a desired size.
5.
To navigate the picture, press MODE/ENTER to switch to the paning mode and press
the directional arrows ( ,
the directional arrows ( ,
,
,
) to navigate the picture.
6.
Use the directional arrows ( ,
,
,
) on the projector or remote control to
navigate the picture.
7.
To reduce size of the picture, press MODE/ENTER to switch back to the zoom in/out
functionality, and press AUTO to restore the picture to its original size. You can also
press repeatedly until it is restored to the original size.
functionality, and press AUTO to restore the picture to its original size. You can also
press repeatedly until it is restored to the original size.
The picture can only be navigated after the picture is magnified. You can further magnify the
picture while searching for details.
picture while searching for details.
Selecting the aspect ratio
The 'aspect ratio' is the ratio of the image width to the image height. Most analog TV and
computers are in 4:3 ratio, which is the default for this projector, and digital TV and DVDs
are usually in 16:9 ratio.
computers are in 4:3 ratio, which is the default for this projector, and digital TV and DVDs
are usually in 16:9 ratio.
With the advent of digital signal processing, digital display devices like this projector can
dynamically stretch and scale the image output to a different aspect than that of the image
input signal.
dynamically stretch and scale the image output to a different aspect than that of the image
input signal.
To change the projected image ratio (no matter what aspect the source is):