Benq MX766 Manuel D’Utilisation

Operation

63

This function is designed to prevent unauthorized people from maliciously changing the 
projector settings through the Projector Network Display System. 

To enable the function:

1.

After your computer is connected to the projector, enter the address of the 
projector in the address bar of your browser and press Enter.

2.

Go to the Admin page of the Projector Network Display System.

3.

Enter the current password.

4.

Click ON in the Web Control Lock row.

The next time someone connects to this projector, the Projector Network Display System 
page provides limited functions.

To disable the function:

1.

Go to the Admin page of the Projector Network Display System.

2.

Enter the current password.

3.

Click OFF in the Web Control Lock row.

You can also use the OSD menu to toggle this function:

1.

Go to the SYSTEM SETUP: Advanced > Security Settings > Change 
Security Settings menu after opening the OSD menu system. Press MODE/
ENTER. The message “INPUT PASSWORD” appears. Enter the current password.

2.

If the password is correct, the OSD menu returns to the Security Settings page. 

Press  

to 

highlight 

Web Control Lock and press 

/

 to select On or Off.

This function is designed to ensure network display through the correct projector. To 
toggle this function:

1.

Go to the SYSTEM SETUP: Advanced > Network Settings menu after 
opening the OSD menu system. Press MODE/ENTER.

2.

Press  

to 

highlight 

Projection Log In Code and press 

/

 to select On or 

Off.

When this function is on, the projector 
generates a random 4-digit code in the 
upper right corner when you switch the 
source to Network Display. You need 
to key in this 4-digit code in the Q 
Presenter when connecting to the 
projector.