Benq W20000 Manuel D’Utilisation
6
Overview
Eng
lish
lish
Overview
Shipping contents
The projector is shipped with the cables required for connection to video equipment. Some of the items may not
be available depending on your region of purchase. Please check with your place of purchase.
be available depending on your region of purchase. Please check with your place of purchase.
Some of the accessories may vary from region to region.
The warranty card and safety manual are only supplied in some specific regions. Please consult your
dealer for detailed information.
dealer for detailed information.
Remote control batteries
1.
To open the battery cover, turn the remote
control over to view its back, push on the
finger grip on the cover and slide it down in
the direction of the arrow as illustrated. The
cover will slide off.
control over to view its back, push on the
finger grip on the cover and slide it down in
the direction of the arrow as illustrated. The
cover will slide off.
2.
Remove any existing batteries (if necessary)
and install two new AAA batteries observing
the battery polarities as indicated in the base of the battery compartment. Positive (+) goes to positive and
negative(-) goes to negative.
and install two new AAA batteries observing
the battery polarities as indicated in the base of the battery compartment. Positive (+) goes to positive and
negative(-) goes to negative.
3.
Refit the cover by aligning it with the case and sliding it back up into position. Stop when it clicks into place.
Notes on handling batteries
•
Do not mix old batteries with new ones, or mix different types of batteries.
•
Avoid leaving the remote control and batteries in an excessive heat or humid environment like the kitchen,
bathroom, sauna, sunroom, or in a closed car.
bathroom, sauna, sunroom, or in a closed car.
•
Dispose of used batteries according to the battery manufacturer’s instructions and local environment
regulations for your region.
regulations for your region.
•
If the remote control will not be used for an extended period of time, remove the batteries to avoid damage
to the control from possible battery leakage.
to the control from possible battery leakage.
Remote control operation
•
Make sure that there is nothing positioned between the
remote control and the infrared (IR) sensor on the
projector that might obstruct the IR beam from the
remote control reaching the projector.
remote control and the infrared (IR) sensor on the
projector that might obstruct the IR beam from the
remote control reaching the projector.
•
The effective range of the remote control is up to 8
meters, and at an angle within 45 degrees of the IR
beam. Always aim straight at the projector, however
most screens will also reflect the IR beam to the
projector.
meters, and at an angle within 45 degrees of the IR
beam. Always aim straight at the projector, however
most screens will also reflect the IR beam to the
projector.
Projector
Power cable
Component
Video cable
Video cable
Remote
control
Batteries
User
manual
Dust filter
W20000
(CHINA) (EU)
(UK)
(US)
(3-2
power
adaptor)
power
adaptor)
W20000
W50
00
up to 8m
W20000-en.book Page 6 Monday, October 22, 2007 3:35 PM