Benq W6500 Manuel D’Utilisation

  31

  Using the projector

Eng
lish

Color Management

In most installation situations, color management will not be necessary, such as in classroom, meeting 
room, or lounge room situations where lights remain on, or where building external windows allow 
daylight into the room. 

Only in permanent installations with controlled lighting levels such as boardrooms, lecture theaters, or 
home theaters, should color management be considered. Color management provides fine color control 
adjustment to allow for more accurate color reproduction, should you require it.

Proper color management can only be achieved under controlled and reproducible viewing conditions. 
You will need to use a colorimeter (color light meter), and provide a set of suitable source images to 
measure color reproduction. These tools are not provided with the projector, however, your projector 
supplier should be able to provide you with suitable guidance, or even an experienced professional installer.

The Color Management provides six sets (RGBCMY) of colors to be adjusted to favorite colors. When you 
select each color, you can independently adjust its color range and saturation according to your preference.

To adjust and store the settings:
1. In the Picture -- Advanced menu, highlight Color Management and 

press ENTER. The Color Management page displays.

2. Highlight Primary Color and press 

/

 to select a color from among 

Red, Yellow, Green, Cyan, Blue, and Magenta.

3. Press  

to 

highlight 

Range and press 

/

 to select the color range 

you wish to make adjustment. The bigger the range, the more 
proportions of its two adjacent colors the color contains.
Please refer to the illustration to the right for how the colors relate to 
each other. For example, if you select Red and set its range at 0, only 
pure red is selected. Increasing its range will include both the red color 
close to yellow and red color close to magenta.
Press   to highlight Saturation and adjust the color saturation level by 
pressing /

. 

If you select Red and set its range at 0, only the saturation of the pure 
red will be affected. 

4. To leave and save the settings, press MENU once or EXIT twice.

Setting Film Mode

This feature helps improve picture quality when projecting video image 
from a film-sourced DVD.