Benq MP576 Manuel D’Utilisation

Operation

31

Magnifying and searching for details

If you need to find the details on the projected picture, magnify the picture. Use the 
direction arrow keys for navigating the picture.

•  Using the remote control
1.

Press Digital Zoom+/- to display the Zoom bar. 
Press Digital Zoom+ to magnify the center of the 
picture. Press the key repeatedly until the picture 
size is suitable for your need.

2.

Use the directional arrows ( , 

, 

, 

) on the 

projector or remote control to navigate the 
picture.

3.

To restore the picture to its original size, press 
AUTO. You can also press Digital Zoom-. When 
the key is pressed again, the picture is further 
reduced until it is restored to the original size.

•  Using the OSD menu
1.

Press Menu/Exit and then press 

/

 until the 

DISPLAY menu is highlighted.

2.

Press

 

 to highlight Digital Zoom and press Mode/Enter. The Zoom bar displays.

3.

If you are using the remote control, follow the steps 1 - 3 in the 

 section above. If you are using the projector control panel, press   

repeatedly to magnify the picture to a desired size.

4.

To navigate the picture, press Mode/Enter to switch to the paning mode and press 
the directional arrows ( , 

, 

, 

) on the projector or remote control to 

navigate the picture.

5.

To reduce size of the picture, press Mode/Enter to switch back to the zoom in/out 
function, and press AUTO to restore the picture to its original size. You can also 
press   repeatedly until it is restored to the original size.

Selecting the aspect ratio

The "aspect ratio" is the ratio of the image width to the image height. Most analog TV 
and computers are in 4:3 ratio, and digital TV and DVDs are usually in 16:9 ratio.

With the advent of digital signal processing, digital display devices like this projector can 
dynamically stretch and scale the image output to a different aspect than that of the 
image input signal.

To change the projected picture ratio (no matter what aspect the source is):

1.

Press Menu/Exit and then press 

/

 until the DISPLAY menu is highlighted.

2.

Press

 

 to highlight Aspect Ratio.

3.

Press  /  to select an aspect ratio to suit the format of the video signal and your 
display requirements.