Benq MP624 Manuel D’Utilisation

Operation

28

Switching input signal

The projector can be connected to multiple devices at the same time. However, it can only 
display one full screen at a time.

Be sure the Quick Auto Search function in the SOURCE menu is On (which is the default of 
this projector) if you want the projector to automatically search for the signals.

You can also manually cycle through the available 
input signals.

1.

Press Source on the projector or remote 
control. A source selection bar displays. 

2.

Press 

/

 until your desired signal is 

selected and press Mode/Enter.
Once detected, the selected source information 
will display on the screen for seconds. If there 
is multiple equipment connected to the 
projector, repeat steps 1-2 to search for another 
signal.

•

The brightness level of the projected image will 
change accordingly when you switch between 
different input signals. Data (graphic) "PC" 
presentations using mostly static images are 
generally brighter than "Video" using mostly moving 
images (movies).

•

The input signal type effects the options available for the Picture Mode. See

 for details.

•

The native display resolution of this projector is in a 4:3 aspect ratio. For best display picture 
results, you should select and use an input signal which outputs at this resolution. Any other 
resolutions will be scaled by the projector depending upon the 'aspect ratio' setting, which may 
cause some image distortion or loss of picture clarity. See 

 

for details.

Changing color space

In the unlikely event that you connect the projector to a DVD player via the projector’s 
HDMI input and the projected picture displays wrong colors, please change the color space.

To do this:

1.

Press Menu/Exit and then press  /

 until the SOURCE menu is highlighted.

2.

Press   to highlight Color Space Conversion and press  /

 to select a suitable color 

space. The selectable settings vary according to the detected input signal timing.

This function is only available when the HDMI input socket is in use.