Sanyo WM5500L Manuel D’Utilisation

① ON/STAND-By button
 

Turn the projector on or off (pp.23-24).

② MENU button
 

Open or close the On-Screen Menu (p.25).

⑤ Point ▲▼◄► ( VOLUME – / + ) buttons
 

– Select an item or adjust the value in the On-

Screen Menu (p.25).

 

– Pan the image in Digital zoom + mode (p.43).

  – Adjust the volume level (with Point ◄► buttons) 

(p.28).

⑩ WARNING TEMP . indicator
 

Blink red when the internal temperature of the 
projector exceeds the operating range (pp.72, 
79-80).

④ SHUTTER button
    Close and open up the built-in shutter. (p.27)

 ⑧ POWER indicator

– Light green while the projector is in stand-by mode.
– Light green during operations.
– Blink green in the Power management mode (p.59).

③ SELECT button
 

– Execute the selected item (p.25).

 

– Expand or compress the image in the Digital 

zoom mode (p.43).

⑨ LAMP indicator
 

Light red during operations.

⑬ LAMP REPLACE indicator
 

Light orange when the projection lamp reaches 
its end of life (pp.69, 80).

⑪ WARNING FILTER indicator
 

– Blink slow when the filter is being scrolled 

(pp.66, 79). 

 

– Blink fast when the filter scroll is not working 

properly or the filter cartridge is not installed 
(pp.66, 81).

 

– Light orange when the clogging of the filter is 

detected or the filter counter reaches a time 
set in the timer setting, urging immediate 
filter/ filter cartridge replacement (pp.65, 66, 
81).

①

⑦ INPUT button
 

Select an input source (pp.33-35).

⑥ LENS button
 

Enter the focus, zoom, and lens shift adjustment 
mode (p.27).

②

④

⑥

③

⑤

⑦

⑨

⑧

⑩

⑪

⑫

⑬

⑫ SHUTTER indicator

 

Light blue when the shutter is closed (p.79).