Sanyo WM5500L Manuel D’Utilisation

● THIS APPARATUS MUST BE EARTHED .

●  TO REDUCE THE RISK OF FIRE OR 

–  This projector produces intense light from the projection 

lens. Do not stare directly into the lens, otherwise eye 
damage could result. Be especially careful that children do 
not stare directly into the beam.

–  Install the projector in a proper position. Otherwise it may 

result in a fire hazard.

–  Allowing the proper amount of space on the top, sides, 

and rear of the projector cabinet is critical for proper 
air circulation and cooling of the unit. The diagrams 
shown here indicates the minimum space required. If 
the projector is to be built into a compartment or similarly 
enclosed, these minimum distances  must be maintained.

–  Do not cover the ventilation slots on the projector. Heat 

build-up can reduce the service life of your projector, and 
can also be dangerous.

–  If the projector is unused for an extended time, unplug the 

projector from the power outlet.

–  Do not project the same image for a long time. The 

afterimage may remain on the LCD panels by the 
characteristic of panel.

THIS SYMBOL INDICATES THAT 
DANGEROUS VOLTAGE CONSTITUTING A 
RISK OF ELECTRIC SHOCK IS PRESENT 
WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE 
ARE IMPORTANT OPERATING AND 
MAINTENANCE INSTRUCTIONS IN THE 
OWNER'S MANUAL WITH THIS UNIT.

Before installing and operating the projector, read this 
manual thoroughly.
The projector provides many convenient features and 
functions. Operating the projector properly enables 
you to manage those features and maintains it in good 
condition for many years to come.
Improper operation may result in not only shortening the 
product life, but also malfunctions, fire hazard, or other 
accidents.
If your projector seems to operate improperly, read this 
manual again, check operations and cable connections 
and try the solutions in the “Troubleshooting” section 
in the back of this manual. If the problem still persists, 
contact the dealer where you purchased the projector or 
the service center.

FOR EU USERS
The symbol mark and recycling systems described below ap-
ply to EU countries and do not apply to countries in other ar-
eas of the world.
Your  product  is  designed  and  manufactured  with  high  qual-
ity  materials  and  components  which  can  be  recycled  and/or 
reused.
The symbol mark means that electrical and electronic equip-
ment, batteries and accumulators, at their end-of-life, should 
be disposed of separately from your household waste.

Note: 
If a chemical symbol is printed beneath the symbol mark, this 
chemical symbol means that the battery or accumulator con-
tains  a  heavy  metal  at  a  certain  concentration.  This  will  be 
indicated as follows: Hg: mercury, Cd: cadmium, Pb: lead
In the European Union there are separate collection systems 
for used electrical and electronic equipment, batteries and 
accumulators.
Please, dispose of them correctly at your local 
community waste collection/recycling centre.

Please, help us to conserve the environment 
we live in! 

Not for use in a computer room as defined in the 
Standard for the Protection of Electronic Computer/
Data Processing Equipment, ANSI/NFPA 75.

SIDE and TOP

REAR

0.7’(20cm)

1.5’(50cm)

3’(1m)

3’(1m)

20cm

50cm

1m

1m