Viewsonic VS13835 Manuel D’Utilisation

123

ViewSonic 

Pro9500

If you want to change the Network 

configuration to add, click the 

[Change]. A 

dialog for changing the Network configuration 

as shown to the right will be displayed. Enter 

IP address and subnet mask , then click the 

[OK]. Procedure to connect to the projector 

will start. 

Proceed to item 

connection to your destination.

If you click the 

[Cancel], you will return to the 

dialog for adding a Network configuration.

If the entered IP address and projector's IP 

address are the same, a warning dialog shown 

to the right will be displayed.  

Click the 

[OK], and then enter a different IP 

address from the projector's one in the dialog 

for changing Network configuration.

If the connection is not available with the 

entered Network configuration, a warning 

dialog shown to the right will be displayed.

Click the 

[OK] to return to the dialog for 

changing the Network configuration, and then 

enter appropriate configuration.

If you put a check mark in the box “Not displaying confirmation dialog for adding 

Network settings”, the projector memorizes current configuration and this dialog 

is not displayed again. To display this dialog again, click Option   icon in the 

“LiveViewer” main menu and remove the check mark in the box “Not displaying 

confirmation dialog for adding Network settings”.

1. Connection to the network

• If a Network configuration to connect to the projector has been added 

on the computer, the added Network configuration will be erased once the 

application software is closed.

NOTE