Viewsonic VS13835 Manuel D’Utilisation

ViewSonic

Pro9500

IMAGE menu

From the IMAGE menu, items shown in the table

below can be performed.

Select an item using the ▲/▼ cursor buttons, and

press the ► cursor button or

ENTER button to

execute the item. Then perform it according to the

following table.

Item

Description

ASPECT

Using the ▲/▼ buttons switches the mode for aspect ratio.

For a computer signal

NORMAL ó 4:3 ó 16:9 ó 16:10

For an HDMI

signal

NORMAL ó 4:3 ó 16:9 ó 16:10 ó 14:9

For a video signal, s-video signal or component video signal

4:3 ó 16:9 ó 14:9

For an input signal from the LAN, USB TYPE A or USB TYPE B

port, or if there is no signal

• The NORMAL mode keeps the original aspect ratio of the signal.

OVER SCAN

Using the ◄/► buttons adjusts the over-scan ratio.

Small (It magnifies picture) ó Large (It reduces picture)

• This item can be selected only for a video, s-video and component

video signal.

•

For an HDMI

signal, this item can also be selected if either (1) or

(2) applies.

(1) HDMI FORMAT item in the INPUT menu is set to VIDEO.

(2) HDMI FORMAT item in the INPUT menu is set to AUTO, and the

projector recognizes that it receives video signals.

(continued on next page)