Sony VPL-VW60 Manuel D’Utilisation

 

18

You can enjoy better picture quality by connecting a DVD player/recorder or Blu-ray Disc 
player equipped with HDMI output to the HDMI input of the projector. Moreover, if you 
have an HDMI control compatible equipment, you can operate the projector 
synchronizing with the HDMI control compatible equipment. For details, see the Function 

 menu (

1 page 48) and “About the HDMI Control” (1 page 53).

 

• When connecting equipment to the HDMI input of the projector, be sure to use 

equipment that have acquired the HDMI logo.

• When connecting an HDMI cable to the projector, make sure the 

V

 mark on the upper 

part of the HDMI input of the projector and the 

V

 mark on the connector of the cable is 

set at the same position.

• If the picture from equipment connected to the projector with an HDMI cable is not 

clear, check the settings of the connected equipment.

HDMI cable (not supplied)

: Video signal flow

Right side of the projector

DVD player/recorder or 
Blu-ray Disc player, etc., 
with the HDMI output

to HDMI output

AV amplifier

Speakers

When using an optional HDMI cable, be sure to use 
a cable that has acquired the HDMI logo.

............................................................................................................................................................
HDMI Control is an HDMI standard mutual control function which uses the HDMI CEC (Consumer 
Electronics Control) specification.
This projector supports PC display input of HDMI standards. It also supports HDCP.