Benq MP782 ST Manuel D’Utilisation

Operation

38

Freezing the image

Press FREEZE on the remote control to freeze the 
image. The word “FREEZE” will be displayed in the 
upper left corner of the screen. To release the function, 
press any key on the projector or remote control.

Even if an image is frozen on the screen, the pictures 
are running on the video or other device. If the 
connected devices have active audio output, you will 
still hear the audio even though the image is frozen 
onscreen.

Hiding the image

In order to draw the audience's full attention to the 
presenter, you can use BLANK on the projector or 
remote control to hide the screen image. The word 
“BLANK” appears in the corner of the screen while the 
image is hidden. When this function is activated with an 
audio input connected, the audio can still be heard. 

You can set the blank time in the 

SYSTEM SETUP: 

Basic > Blank Timer 

menu

 

to let the projector return 

the image automatically after a period of time when 
there is no action taken on the blank screen. The length 
of time can be set from 5 to 30 minutes in 5-minute 
increments.

If the preset time spans are not suitable for your 
personation, select Disable.

No matter 

Blank Timer

 is activated or not, you can press 

most of the keys on the projector or remote control to 
restore the picture.