Fisher PDG-DWT50KL Manuel D’Utilisation
8. Specifications
116
Status Read Command Table
C
OMMAND
F
UNCTION
CR0 Status
Read
CR6 Temperature
Read
PC Control Connector (DIN-9P)
Note:
1. Pin 1, 4, 6 and 9 are not used.
2. Jumper “Request to Send” and “Clear to Send” together on both ends of the cable to simplify the cable
connection.
3. For long cables, it is recommended to set communication speed within projector menus to 9600 bps.
1. Pin 1, 4, 6 and 9 are not used.
2. Jumper “Request to Send” and “Clear to Send” together on both ends of the cable to simplify the cable
connection.
3. For long cables, it is recommended to set communication speed within projector menus to 9600 bps.