Epson EB-97H Manuel D’Utilisation
Settings Menu
Submenu
Function
Keystone
You can correct keystone distortion.
• When H/V-Keystone is selected:
• When H/V-Keystone is selected:
Adjust V-Keystone and H-Keystone to correct horizontal
and vertical keystone distortion.
You can also set H-Keystone Adjuster and Auto V-
Keystone to On or Off.
and vertical keystone distortion.
You can also set H-Keystone Adjuster and Auto V-
Keystone to On or Off.
• When Quick Corner is selected:
Select and correct the four corners of the projected image.
s
s
Split Screen
Switches to split screen projection.
s
Zoom
(EB-S29/EB-S27
only)
(EB-S29/EB-S27
only)
Adjusts the size of the projected image.
Submenu
Function
Control Panel
Lock
Lock
You can use this to restrict operation of the projector's control
panel.
panel.
s
Pointer Shape
You can select the shape of the pointer.
Pointer 1:
Pointer 2:
Pointer 3:
s
Volume
You can adjust the volume. Setting values are saved for each
source.
source.
Mic Input Level
(EB-955WH/
EB-950WH/
EB-965H/
EB-945H/
EB-940H/
EB-98H/EB-97H
only)
(EB-955WH/
EB-950WH/
EB-965H/
EB-945H/
EB-940H/
EB-98H/EB-97H
only)
Adjust this if the microphone input level is low and the
microphone audio output from the projector's speaker is difficult
to hear, or if the input level is too high, resulting in a crackling
sound in audio from the microphone.
When the Mic Input Level is turned down to 0, no audio is
output from the speaker.
microphone audio output from the projector's speaker is difficult
to hear, or if the input level is too high, resulting in a crackling
sound in audio from the microphone.
When the Mic Input Level is turned down to 0, no audio is
output from the speaker.
Remote Receiver
You can limit the reception of the operation signal from the
remote control.
When set to Off, you cannot perform any operations from the
remote control. If you want to make operations from the remote
control, hold down the [Menu] button on the remote control for
at least 15 seconds to reset the setting to its default value.
remote control.
When set to Off, you cannot perform any operations from the
remote control. If you want to make operations from the remote
control, hold down the [Menu] button on the remote control for
at least 15 seconds to reset the setting to its default value.
List of Functions
105