Epson 7850p Manuel D’Utilisation

Follow these instructions to connect the projector to a video player 
that has an RGB video output port. Depending on the type of 
connector on your player, you’ll need to use the appropriate cable:

■

If your player has a single VGA-style connector, see below.

■

If your player has three connectors labeled R/G/B, see 
“Connecting Using a BNC-style Cable” on page 63.

1. Locate the VGA computer cable provided with the projector. 

2. Connect the cable between the video port on your player and the 

Computer 

port on the projector.

3. If you want to play sound through the projector, see page 65 for 

instructions on connecting an audio cable.

4. If you don’t need to make any other connections, see Chapter 1 

for instructions on turning on the projector and adjusting the 
image. Once the projector is turned on, be sure to:

■

Enter the projector’s Setting menu, then change the 
Computer Input setting to 

RGB-Video

 (see page 137).

■

After exiting the menu system, press the remote control’s 

Comp

 button or the projector’s 

Computer/DVI

 button 

repeatedly to select the image source. (

Computer (RGB 

Video)

 should appear on the screen.)