Epson 750c Fascicule

Locate the required cables:

Connect the computer cable to 
the blue Computer/Component Video
port on the projector.

Connect the other end to your notebook’s video-out
or monitor 

port.

If your notebook has a DVI connector, you need to use an

optional DVI-to-VGA adapter with the included computer cable
(see your computer’s documentation). 

Connect the power cord to the
projector, then plug the other end
into an electrical outlet.

Turn on your notebook.

Remove the projector’s lens cover.

Make sure the Power light
is orange and not flashing.

Press the     Power button
to turn on the projector.

Follow these instructions to connect the projector to your
notebook. For other setup options, see your User’s Guide.

®

®

Power cord

VGA computer cable

If you’ve turned on your notebook and you don’t see an image, 
press the Source Search button on the projector to select the 
image source. 

If you still see a blank screen or have other display problems,

see the troubleshooting tips on the back of this sheet.

Turn the focus ring to sharpen the image.

Turn the zoom ring to reduce or enlarge the image.

If your image looks like 

or 

, you’ve placed the projector off 

to one side of the screen at an angle. Place it directly in front of the
center of the screen, facing the screen squarely. 

If your image looks like 

or 

, press the 

or 

buttons 

on the projector to correct it.

Shut down the projector properly:

1. Press the 

Power button twice. 

2. When the orange light stops flashing and the projector beeps, 

you can unplug the projector.

Power button

Power light

Zoom

Focus

PL750760_QS_CPD20249.qxd  6/24/05  3:25 PM  Page 1