Epson 811p Fascicule

Make sure your projector and laptop are turned off.

Connect one end of the computer cable to the
Computer/Component Video port on the projector.

Connect the other end to your laptop’s video
or      monitor port.

Connect the power cord to your projector and plug the other end into a grounded outlet.

Follow these instructions to connect the projector
to your laptop. To connect other devices, such as
a VCR or desktop PC, see your User’s Guide.

power button

power light

®

®

Press the red Power button twice, then let the projector cool while the     power
light flashes orange (about a minute and a half). Once the light stops flashing
and stays on, it’s safe to unplug the projector.

Never unplug the projector when the     power light is green or flashing orange.

For most setups, you’ll need just these two cables:

power cord

computer cable

Remove the lens cover.

Turn on the projector first. To do so, press the red Power button.
The      power light flashes green as the projector warms up,
and the projection lamp comes on in about 30 seconds.

Turn on or restart your laptop. (Windows

®

only: If you see a

New Hardware Wizard screen for a Plug and Play monitor, click Cancel.)