Epson emp - 820 Manuel D’Utilisation

Page de 120
29
Connecting to a Video Source
Caution :
When connecting the projector to other video sources, take the following precautions.
• Turn off the power for both the projector and the video source before connecting them. 
If the power for either device is on at the time of connection, damage may result.
• Check the shapes of the cable connectors and the device ports before making the 
connections. If you try to force a connector to fit a device port with a different shape or 
number of terminals, a malfunction or damage to the connector or port may result.
Projecting Composite Video Images
• Use the accessory A/V cable (red/white/yellow) to connect the video source 
to the Video and Audio 2 ports at the rear of the projector.
• If the audio output port of the video source is a stereo mini jack, use a 
commercially-available audio cable to connect the video source to the Audio 
1 port at the rear of the projector.
Tip :
After making the connections, change the Audio Input setting in the Audio menu to 
either Audio1Audio2 or USB, depending on which input port you are using. The 
default setting is Audio2.
A/V cable 
(accessory)
To Audio 2 port 
(white/red)
When connecting using the A/V cable
To Video port (yellow)
To video output port (yellow)
To audio output L port (white)
To audio output R port (red)
To Audio 1 port
Audio cable (commercially-available)
When the video equipment's audio output port is a stereo mini jack
To audio output 
port
To video output 
port (yellow)
To Video port 
(yellow)
A/V cable (yellow) 
(accessory)