Epson EB-Z10005U Manuel D’Utilisation
Submenu
Function
Sync Info
You can display the image signal
information.
This information may be needed if service
is required.
information.
This information may be needed if service
is required.
Status
You can display information about errors
that have occurred on the projector.
This information may be needed if service
is required.
that have occurred on the projector.
This information may be needed if service
is required.
Serial Number
You can display the projector's serial
number.
number.
Event ID
When problems occur when the projector
and computer are connected through the
network, information on the problem is
displayed using an Event ID. See the
following page for information on
interpreting the Event ID.
s
and computer are connected through the
network, information on the problem is
displayed using an Event ID. See the
following page for information on
interpreting the Event ID.
s
HDBaseT Sig‐
nal Quality
nal Quality
You can display the image signal
information from the HDBaseT port.
information from the HDBaseT port.
Lamp Info
Lamp Hours
You can display the cumulative lamp
operating time
operating time
*
.
When the lamp replacement time is
reached, the characters are displayed in
yellow.
reached, the characters are displayed in
yellow.
Lamp Status
The following icons show the status of the
lamps.
lamps.
: On
: Off
Submenu
Function
Version
Main
Video
Status Monitor
Video
Status Monitor
Displays the projector's firmware version
information.
information.
*
The cumulative use time is displayed as "0H" for the first 10 hours. 10 hours
and above is displayed as "10H", "11H", and so on.
and above is displayed as "10H", "11H", and so on.
List of Functions
137