EIKI LC-WB40N Manuel D’Utilisation

Choose either Computer 1 (Analog) or Computer 2 by 

pressing the INPUT button on the top control or press the 

COMPUTER button on the remote control.

Before using these buttons, correct input source should be 

selected through Menu operation as described below.

Press the MENU button to display the On-Screen 

Menu. Use the Point 

7 8

 buttons to move the red 

frame pointer to the Input Menu icon.

Use the Point 

ed

 buttons to move the red arrow 

pointer to either Computer 1 (Analog) or Computer 2, 

and then press the SELECT button.

When selecting Computer 1 (Analog), RGB input 

source will be selected directly.  

When selecting Computer 2, the Source Select Menu 

appears. Move the pointer to RGB and then press the 

SELECT button.

Move the pointer (red 

arrow) to Computer 1 

(Analog) and press the 

SELECT button.

Input Menu icon

✔

  • Wired and Wireless are for the Network function.  See 

owner’s manual “Network Set-up and Operation”.

  • When the Input Search function is set to “On1” or “On2”, 

the input signal will be searched automatically (p.51).

Move the pointer 

(red arrow) to RGB.

Move the pointer (red 

arrow) to Computer 2 

and press the SELECT 

button.

Input Menu icon