EIKI LC-WB40N Manuel D’Utilisation

Unplug the AC power cord before cleaning.

Gently wipe the projection lens with a cleaning cloth that 

contains a small amount of non-abrasive camera lens 

cleaner, or use a lens cleaning paper or commercially 

available air blower to clean the lens. 

Avoid using an excessive amount of cleaner. Abrasive 

cleaners, solvents, or other harsh chemicals might scratch 

the surface of the lens.

Unplug the AC power cord before cleaning.

Gently wipe the projector body with a soft dry cleaning cloth. 

When the cabinet is heavily soiled, use a small amount of 

mild detergent and finish with a soft dry cleaning cloth. Avoid 

using an excessive amount of cleaner. Abrasive cleaners, 

solvents, or other harsh chemicals might scratch the surface 

of the cabinet.

When the projector is not in use, put the projector in 

an appropriate carrying case to protect it from dust and 

scratches.

Slide Shutter

Slide Shutter is provided to protect the surface of the lens 

against scratches and dirt. When you are not using the 

projector, close the Slide Shutter. 

To open or close, slide the Slide Shutter on the front of the 

cabinet.

Do not close the shutter when the projection lamp is on.