EIKI LC-X2U Manuel D’Utilisation

 

This projector has other functions setting: Blue back, Display, Reverse T/B, 

Reverse R/L, Split wipe, Power management, USB, Remote control and 

Lamp age. 

 

 

 

When this function is 

in 

the “On” position, the projector will project a blue image 

without video noise on the screen when the video source is unplugged or turned 

off. 

 

 

 

When this function is 

in 

the “On” position, on-screen displays always appear when adjustments are made. Although 

these on-screen displays are very helpful, these may spoil the view 

if 

adjustments are made during presentations. 

To avoid this, you can keep back certain displays by switching 

this function 

“Off”. The followings are the displays 

that you can hide. 
• Wait Display 

Mode Display 

Volume Display 

• Mute Display 

Zoom/Focus/Lens shift Display 

D.Zoom Display 

• Normal Display 

No show Display 

 

 

 

 

When this function is in the “On” position, the top/bottom-picture reverse. 

 

 

 

When this function is in the “On” position, the left/right picture reverse 

capability lets you project onto a rear projection screen. 

 

 

 

Turn SPLIT WIPE function On in the SETTING menu. The picture will change into next one by sliding black image 

side ways when the input source 

is changed.

 

Change the input source by MODE button. The picture is replaced by black image from side ways to the center, and 

the next one appears from the center to side ways like drawing the black curtains. 

 

 

 

Power management will be turn the projector Lamp off when the input signal is interrupted (Picture is not displayed) 

over 5 minutes. This aims at saving power and Lamp life. The Lamp is automatically turned on when the signal is 

input. To activate this function, turn the “Power management” in the SETTING menu “On”. 

 

 

 

This Projector is designed for connecting with SUB Port of the computer or peripheral equipment that is to be 

standard. 

When this function is in the “   

“ (Mouse) position, you control the pointer of the computer using the projector’s 

wireless remote control unit. 

When this function is in the “  

“ (Control) position, you control the projector by computer. 

NOTE:  Before you control the projector by computer, install USB driver )optionally saled parts) and set up the   

computer following instruction in the USB driver package.  Contact your authorized dealer. 
 
 

 

 

 

 

Turn SPLIT WIPE function On in the SETTING menu. The picture will change into next one by sliding black image 

side ways when the input source 

is changed. 

 

When this function 

is 

in the “On” position, the left/right picture reverse capability

Turn SPLIT WIPE function On in the SETTING menu. The picture will change into next one by sliding black image 

side ways when the input source 

is changed.