EIKI LC-X2U Manuel D’Utilisation

 

 

The TEMPERATURE WARNING INDICATOR flashes red when the 

internal 

temperature of the projector exceeds the normal temperature. 

Possible causes for the temperature warning may be: 

1.  Ventilation slots of the projector are blocked. In such an event, 

reposition 

the projector so that ventilation slots are not obstructed. 

2.  Air filter is clogged with dust particles. Remove dust from the air 

filter by 

following instructions in the Air Filter Care and Cleaning section 

above. 

If the TEMPERATURE WARNING INDICATOR still continues to flash after 

checking (1) and (2), call your authorized dealer or service station. 

 

 

 

 

 

 

 

The removable air filter prevents dust from accumulating on the surface of 

the projection lens and projection mirror. Should 

the air filter become 

clogged with dust particles, it will reduce the cooling fan’s 

effectiveness and may result in internal heat 

build up and reduce the life 

of the projector. 

 

To clean the air filter, follow the cleaning procedures below: 

Turn the POWER ON/OFF button OFF. 

2. Remove the 

air filter cover. 

3. Remove 

the 

air filter and sponge 

from the filter cover. 

4.  Clean the air filter with a vacuum cleaner. 

5.  Replace the air filter and sponge. Make sure that air filter cover is 

fully inserted. 

 

 

Do not clean with water. Doing so may damage the air filter. 

Do not operate the projector with air filter removed. 

 

 

 

 

 

 

When used under the 

dusty or smoky conditions, dust may accumulate on the 

liquid crystal panel and lens inside 

it, and may resultantly be projected on 

the screen together with the picture. 

When the above symptoms are 

noticed contact the place where your authorized dealer or service station for 

the cleaning.