EIKI LC-XB22 Manuel D’Utilisation

Connect the projector's AC power cord into an AC outlet.
The POWER indicator blinks red in a moment and lights red.

Press the POWER ON-OFF button on the top control or on
the remote control.  The POWER indicator turns green
lighting and the cooling fans start to operate.  The
preparation display appears on the screen and the count
down starts. 

The preparation display disappears after 20 seconds.

After the count-down, the input source that was selected
last and the Lamp mode status icon (see page 42) appear on
the screen.

If the projector is locked with a PIN code, PIN code Input
Dialog Box will appear.  Enter the PIN code as instructed
below.  

(See page 42 for Lamp mode.)

Complete peripheral connections (with a computer, VCR,
etc.) be 85 Tf1ningr of the projectow.