EIKI LC-XB22 Manuel D’Utilisation
24
Choose either Computer 1 or Computer 2 by pressing the INPUT
button on the top control or press the COMPUTER button on the
remote control.
Before using these buttons, correct input source should be
selected through menu operation as described below.
button on the top control or press the COMPUTER button on the
remote control.
Before using these buttons, correct input source should be
selected through menu operation as described below.
Press the MENU button to display the On-Screen Menu.
Press the Point
Press the Point
7 8
buttons to move the red frame pointer
to the Input Menu icon.
1
Computer
1
Input Menu
Press the Point
d
d
button to move the red arrow pointer to
either Computer 1 or Computer 2, and then press the
SELECT button.
SELECT button.
2
Move the pointer to the correct input source and then press
the SELECT button.
the SELECT button.
3
Input Menu
Computer 1
Video
Computer 2
COMPUTER button
Computer 1
Computer 2
When the input source is analog coming from a
computer through the COMPUTER IN 1/
COMPONENT IN terminal, select RGB.
computer through the COMPUTER IN 1/
COMPONENT IN terminal, select RGB.
RGB
INPUT button
Input Source Selection
Direct Operation
Menu Operation
Computer Input
Move the pointer to RGB and
press the SELECT button.
press the SELECT button.
Source Select Menu (COMPUTER)
✔
Note:
Computer 2 is not displayed when the COMPUTER IN 2/ MONITOR OUT terminal is
used as Monitor out. (p41)
used as Monitor out. (p41)
Move the pointer (red
arrow) to Computer 1
and press the SELECT
button.
arrow) to Computer 1
and press the SELECT
button.
Input Menu icon
Move the pointer (red
arrow) to Computer 2
and press the SELECT
button.
arrow) to Computer 2
and press the SELECT
button.
RGB (Scart)
Component
See "Input Source Selection (Component, RGB-
Scart 21-pin )" on p33.
Scart 21-pin )" on p33.
See "Input Source Selection (Component, RGB-
Scart 21-pin )" on p33.
Scart 21-pin )" on p33.
✳ See Note at the bottom of this page.
✳
✳