EIKI LC-XB22 Manuel D’Utilisation

Choose Video by pressing the INPUT button on the top control or
the VIDEO button on the remote control.
Before using these buttons, correct input source should be
selected through menu operation as described below.

Press the MENU button to display the On-Screen Menu.
Press the Point 

7 8

buttons to move the red frame pointer

to the Input Menu icon.

Press the Point 

d

d

button to move the red arrow pointer to

Video. Then press the SELECT button to display the Source
Select Menu. 

Move the pointer to
Video and press the
SELECT button.

Move the pointer to the
source that you want to
select and press the
SELECT button.

Move the pointer to the source that you want to select and
then press the SELECT button.

When selecting Auto, the projector automatically
detects incoming video signal, and adjusts itself to
optimize its performance.  The projector selects
connection in the following order:

1st S-Video
2nd Video

If both the S-VIDEO jack and the VIDEO jack are
connected at the same time when AUTO is selected
in the Input Menu, the S-VIDEO jack will override the
signal from the VIDEO jack.

When video input signal is connected to the VIDEO
jack, select Video.

When video input signal is connected to the S-VIDEO
jack, select S-Video.

✔

✳ See Note at the bottom of this page.

✳

Input Menu icon