JVC LCT2440-001B Manuel D’Utilisation

47

Measures to prevent the unit from toppling or dropping should be taken for safety reasons and accident prevention 
during emergencies including earthquakes.

When mounting this unit on a pedestal or ceiling, remove the 4 feet on the bottom surface and use all the 4 screw 
holes (M5 screws) to mount.

z

Special expertise and techniques are required for 
mounting this unit. Be sure to ask your dealer or a 
specialist to perform mounting.

z

Depth of the screw holes (screw length) is 30 mm. Use 
screws shorter than 30 mm but longer than 19 mm.
Using other screws will result in malfunctioning or 
cause the unit to drop.

z

When mounting to a pedestal, ensure sufficient space 
(foot height of 21.5 mm or higher) around the unit so that 
the air inlets are not blocked.

z

Do not tilt this unit more than ±5 degrees from side to side 
when using. This may result in uneven colours or 
shortening of lamp life.

z

Regardless whether the unit is still under guarantee, JVC 
is not liable for any product damage caused by mounting 
the unit with non-JVC ceiling fittings or when the 
environment is not suitable for ceiling-mount.

z

When using the unit hanging from a ceiling, pay attention 
to the surrounding temperature. When a heater is in use, 
temperature around the ceiling is higher than expected.

Ceiling

Air inlets

4 locations

„

Bottom Surface

DLA-RS1E_EN.book  Page 47  Tuesday, February 26, 2008  10:43 AM