Infocus IN134UST Manuel D’Utilisation
IN134UST/IN136UST User’s Manual
Cleaning the Case
Follow these instructions to clean the projector case:
1.
Wipe off dust with a clean dampened cloth.
2.
Moisten the cloth with warm water and mild detergent (such as used to wash dishes), and then
wipe the case.
wipe the case.
3.
Rinse all detergent from the cloth and wipe the projector again.
Caution:
To prevent discoloration or fading of the case, do not use abrasive alcohol-based cleaners.
Warning:
1. Be sure to turn off and unplug the projector at least 30 minutes before cleaning. Failure to do so
could result in a severe burn.
could result in a severe burn.
2. Use only a dampened cloth when cleaning. Do not allow water to enter the ventilation openings
on the projector.
on the projector.
3. If a little water gets into the projector interior while cleaning, leave it unplugged in a well-
ventilated room for several hours before using.
ventilated room for several hours before using.
4. If a lot of water gets into the projector interior when cleaning, have the projector serviced.
– 43 –