Infocus IN3128HD Manuel D’Utilisation

To connect to the projector wirelessly, you have to plug an InFocus wireless dongle 

(optional) to the USB Type A connector on the projector, and then only a few OSD 

configuration steps are required.

Make sure the projector is turned on.

Press Menu on the keypad or remote and then go to Advanced Menu > Setup 
> Network > Wireless LAN menu.

Make sure the Status is Connect.

Make sure the SSID information is displayed.

In AP mode, you need to use your computer’s wireless connection utility to 
search the projector’s SSID and connect to it. Then you can search the projector 
with ifPresenter. To use Infrastructure mode, you should connect both your 
computer and projector to the same AP router and make connections with the IP 
address.

Once you have the correct IP address for the projector and the projector is on or in 

standby mode, you can use any computer that is on the same local area network to 

control the projector.

• If you are using Microsoft Internet Explorer, make sure it is version 7.0 or 

higher.

• The screenshots in this manual are for reference only, and may differ 

depending on your browser.

Enter the address of the projector in the address bar of your browser and press 
Enter. 

The main page of the Network Control displays.

i.

To change the language for the web pages, click the down arrow to reveal a 
drop down list and select a desired language.

ii.

To download ifPresenter, click Download. See page 34 for details.

InFocus wireless dongle

 

(p/n SP-WIFIUSB)