Infocus 330 Manuel D’Utilisation
9
Connecting a Video Player
1
If your video player uses a round, one-prong composite video
connector, you’ll need only the audio cable, audio adapter,
and composite video cable that shipped with the projector.
connector, you’ll need only the audio cable, audio adapter,
and composite video cable that shipped with the projector.
•
If your video player uses a round, four-prong S-video con-
nector, you’ll need an S-video cable in addition to the audio
cable and audio adapter. The S-video cable is sold sepa-
rately. (See “Optional Accessories” on page 37.)
nector, you’ll need an S-video cable in addition to the audio
cable and audio adapter. The S-video cable is sold sepa-
rately. (See “Optional Accessories” on page 37.)
2
Plug the composite video cable’s yellow connector into the
“video-out” connector on your video player (Figure 6). This
connector may be labeled “To Monitor.”
“video-out” connector on your video player (Figure 6). This
connector may be labeled “To Monitor.”
•
If you’re using an S-video cable, connect it to the “S-video
out” connector on the video player (Figure 7).
out” connector on the video player (Figure 7).
3
Plug the other yellow connector into the composite video con-
nector
on the projector.
•
If you’re using S-video, plug the other end of the cable into
the “S-video” connector
on the projector (Figure 7).
F
IGURE
6
Connecting the projector to a video player using the standard video cable (with com-
posite video connector) and the audio cable and adapter
composite video cable
audio cable
audio
adapter