Canon WX6000 Manuel D’Utilisation
135
Setting Various Functions
User’s Manual
Settin
g
Functions from Menus
Lamp Warning Display
[Lamp warning display]
A message that advises you to change the
lamp can be set to display when the lamp
has been used for the specified period of
time.
lamp can be set to display when the lamp
has been used for the specified period of
time.
MENU > [Install settings] > [On screen] > [Lamp
warning display]
warning display]
Press the
OK button to accept your setting
and then press the
MENU button or EXIT
button (WX6000 / SX6000).
• The factory default is [On].
• Regardless of the [Lamp warning display]
• Regardless of the [Lamp warning display]
setting, when the lamp replacement time has
been reached, the LAMP indicator on the
projector will flash.
been reached, the LAMP indicator on the
projector will flash.
Resetting the Lamp
Counter
Counter
[Lamp counter]
You can reset the lamp counter that indi-
cates the time for lamp replacement.
cates the time for lamp replacement.
MENU > [System settings] > [Other settings] >
[Lamp counter]
[Lamp counter]
MENU > [System settings] > [Other settings] >
[Lamp counter]
[Lamp counter]
HDMI
Component
Digital PC
Analog PC
Off
The lamp warning display is not
displayed.
displayed.
On
The prepare lamp message and
the lamp warning display are dis-
played.
the lamp warning display are dis-
played.
HDMI
Component
Digital PC
Analog PC
Do not reset the lamp counter except
when you have replaced the lamp.
Otherwise, the lamp counter cannot
indicate the correct timing for replac-
ing the lamp.
For details of lamp replacement, refer
to
when you have replaced the lamp.
Otherwise, the lamp counter cannot
indicate the correct timing for replac-
ing the lamp.
For details of lamp replacement, refer
to
.