Canon WX6000 Manuel D’Utilisation

38

(1) LED indicators (

The projector status is shown by the LED indicators (off / on / flashing).
For indicator status, refer to 

(2) POWER button (

, 

)

Turns the projector on or off.

(3) MENU button (

)

Displays a menu on the screen.

(4) LENS button

Each time the button is pressed, the
screen changes to focus adjustment
(

), zoom (image size) adjustment

(

), or lens shift (image position)

adjustment (

). To adjust, use the

[ ]  /  [ ]  or  the  [ ]  /  [ ]  buttons.

(5) INPUT button (

)

Switches the input signal.

(6) Pointer / VOL buttons (

Adjust the sound volume.
[ ] button: Decreases the volume.
[ ] button: Increases the volume.
Selects the upper, lower, left or right
item in the menu.

(7) OK button (

Determines the item selected from the
menu.

• POWER ON (green): Lights up or flashes when the power is on.
• STAND BY (red)

: Lights up or flashes during standby or when the projector is 

shut down.

• WARNING (red)

: Lights up or flashes when an error occurs.

• LAMP (orange)

: Flashes when the time for replacing the lamp is near. When a 

lamp cover error occurs, the [WARNING] indicator will also 
flash. When a lamp error occurs, it will illuminate at the same 
time as the [WARNING] indicator.

• TEMP (red)

: When the temperature inside the projector is high, it will flash. If 

the temperature inside the projector increases further and a 
temperature error occurs, it will illuminate at the same time that 
the [WARNING] indicator illuminates.