Canon WX6000 Manuel D’Utilisation

Adjusting the Image

Adjusting Keystone Distortion

The

D.SHIFT/KEYSTONE button (WUX5000 / WUX4000) or KEYSTONE button

(WX6000 / SX6000) can be used to correct keystone distortion.

Press the D.SHIFT/KEYSTONE button (WUX5000 / WUX4000) or KEYSTONE button
(WX6000 / SX6000) to display the window in the center illustration below.

• Keystone can be adjusted within the range of ±20 degrees. If the keystone distortion is

too large to adjust, move the projector installation position so that it is completely straight.

• The result of keystone adjustment is stored in memory. If you place the projector in the

same position, the keystone adjustment is not necessary.

• Signals are processed digitally when keystone distortion is corrected. The image may

look different from the original one. In addition, the aspect ratio of the image may change.

• Perform keystone distortion correction with the lens shift position in the home position. Cor-

rection will not be performed correctly if the position is not the home position.

Remote control