Canon WX6000 Manuel D’Utilisation

94

[Auto PC]

Automatically adjusts display position mis-
alignment and screen flickering. The 
adjusted result is stored in the memory.

MENU > [Input settings] > [Auto PC]

Press the 

OK button to accept your setting 

and then press the 

MENU button or EXIT 

button (WX6000 / SX6000).

[Input signal select]

You can select a suitable resolution if the 
auto PC adjustment function (

) cannot 

project the correct image from a computer.

MENU > [Display settings] > [Input signal select]

MENU > [Input settings] > [Input signal select]

Press the 

OK button to accept your setting 

and then press the 

MENU button or EXIT 

button (WX6000 / SX6000).

Select an input signal corresponding to 
the resolution of the computer.

• For the signal types supported by the pro-

jector, see the table on 

.

HDMI

Component

Digital PC

Analog PC

If [Auto PC] adjustment is insufficient, 
perform the following operations.
• Select the input signal that matches 

the resolution of the computer from 
[Input signal select]. (

• If adjustment is insufficient even 

when using the above operation, 
adjust [Total dots], [Tracking], [Hori-
zontal/Vertical position] and [Hori-
zontal/Vertical pixels] in [Input signal 
settings]. (

 

– 

• For details about signal formats that 

are compatible with the projector, 
refer to 

HDMI

Component

Digital PC

Analog PC