Canon LV-7265 Manuel D’Utilisation

3. Projecting an Image (Basic Operation)

This section describes how to turn on the projector and to project a picture onto the screen.

❶ Turning on the Projector

NOTE:
• The projector has two power switches: a main power switch and a POWER button.
• When plugging in or unplugging the supplied power cord, make sure that the main power switch is pushed to the off (

) po-

sition. Failure to do so may cause damage to the projector.

WARNING

LAMP

1. To turn on the main power to the projector, press the

Main Power switch to the on position ( I ).

• The POWER indicator will light orange.

See the Power Indicator section on page

for more

details.

3. Press the POWER button on the projector cabinet or

the POWER button on the remote control for about 1
second.

The POWER indicator will turn to green and the projec-
tor will become ready to use.

After you turn on your projector, ensure that the com-
puter or video source is turned on and that your lens
cap is removed.

NOTE: If you turn on the projector immediately after the lamp is
turned off or when the temperature is high, the fans runs without
displaying an image for some time and then the projector will dis-
play the image.

WARNING

POWER

AUT

LAMP

POWER

INPUT

IMAGE

ASPECT

INFO.

MENU

NO SHOW

AUTO PC

WARNING

LAMP

WARNING

LAMP

WARNING

LAMP

Standby

Blinking

Power On

S t e a d y o r-
ange light

Blinking

green light

Steady

green light

See page

for more details.

2. Remove the lens cap.

CAUTION:

The projector cannot be turned off for 60 seconds after
the lamp is turned on and while the POWER indica-
tor is blinking green. Doing so could cause premature
lamp failure.

KEYSTONE

NIN

INPUT

LAM

VOL