Christie Digital Systems DWX555-GS Manuel D’Utilisation

Section 4: OPERATION

GS Series User Manual

020-000724-01 Rev. 1 (05-2014)

4-20

NOTE:



PIP/PBP layout and size table as described below.



P : indicates primary source region (lighter color).



* : Both source regions are the same size.

Timing Detection

Select timing detection mode to wide or normal. It is used to support additional
PC timings. When the projected picture is not completed, this function is used
to adjust the picture. "Normal mode" can support all of the 4:3 input sources.
"Wide mode" can support all of the 16:9 input source & most of the 4:3 input
source. For those 4:3 input sources not recognized by "Wide mode" (example
1400 x 1050), perform Auto Image using "normal mode".

Source Info

Display current source settings (read-only).

Enable Source Hot-Key

Toggle the check box to enable or disable the main source hot-key.

Source Hot-Key

Allows you to assign a different source to the hot-key. Highlight an input and
press ENTER to choose a different one.

PIP/PBP Layout

PIP/PBP Size

Small

Medium

Large

PBP, Bigger Left

Over-Under, Bigger Upper

PBP, Bigger Right

Over-Under, Bigger Lower

PIP-Bottom Right

PIP-Bottom Left

PIP-Top Left

PIP-Top Right