Christie Digital Systems DWX555-GS Manuel D’Utilisation

GS Series User Manual

020-000724-01 Rev. 1 (05-2014)

1-1

1.

SAFETY

Read through this document in its entirety and understand all warnings and 
precautions before attempting to operate the projector.

WARNING

.

• 

Do not look into the projector lens when the laser is on. The bright light 
may result in permanent eye damage.

• 

To reduce the risk of fire or electric shock, do not expose this projector to 
rain or moisture.

• 

Do not open or disassemble the projector as this may cause electric shock.

• 

All installation and maintenance procedures must be performed by a 
Christie accredited service technician.

• 

Keep all combustible material away from the concentrated light beam of 
the projector.

• 

Position all cables where they cannot contact hot surfaces or be pulled or 
tripped over.

• 

Always power down the projector and disconnect all power sources before 
servicing or cleaning.

• 

Use a soft cloth moistened with a mild detergent to clean the display 
housing.

• 

Disconnect the power plug from the AC outlet if the product is not being 
used for an extended period of time.

• 

Operate the projector under the following conditions:
-

Operating temperature range: 5°C to 35°C

-

Storage temperature range: -10°C to 60°C

-

Humidity range: 5% to 80 % RH (Max.), non condensing

-

Operating altitude: 10,000 ft. maximum

• 

Use only the AC power cord supplied. Do not attempt operation if the AC 
supply and cord are not within the specified voltage and power range for 
your region.

• 

Remove the lens plug from the lens opening in the projector before 
installing the lens. Retain the lens plug to protect the optical components 
from dust and debris during transport.

• 

Do not block the ventilation slots and openings on the projector.

• 

Do not use abrasive cleaners, waxes or solvents to clean the projector.

• 

Do not allow anything to rest on the power cord.