Canon LV-7295 Manuel D'Instructions

11

⑦

(MIC)-

②

③

①

⑥

⑤

⑧

④

④   VIDEO IN

 

Connect the composite video output signal 

to this jack (p.18).

②   COMPUTER IN 1 /S-VIDEO IN /

 

Connect output signal from a computer, 

component video output, RGB scart 1-

pin video output or S-VIDEO output to this 

terminal (pp.17-19).

⑥   AUDIO OUT (VARIABLE)

 

Connect an external audio amplifier to this 

jack (pp.17-19).

 

This terminal outputs sound from AUDIO IN 

terminal.

       Never plug headphones into this jack.

⑤   LAN Connection Terminal

 

Connect the LAN cable (refer to the user’s 

manual of “Network Set-up and Operation”).

①   CONTROL PORT

 

When the projector is controlled by a 

computer, connect to this jack with serial 

control cable.

③   COMPUTER IN 2 / MONITOR OUT

 

– Connect analog RGB output signal from a 

  computer to this terminal (p.17).

 

– This terminal can be used to output the 

incoming analog RGB and COMPONENT  

signal from COMPUTER IN 1 /S-VIDEO 

IN /COMPONENT IN terminal to the other 

monitor (pp.17,19).

⑦

⑦   AUDIO IN (PC/MIC)

 

Connect the audio output signal from 

computer or video equipment connected to 

② and ③ to this jack. Or connect the MIC to 

this jack (pp.17-19).

⑧   AUDIO IN (L/R)

    Connect the audio output signal from video 

equipment connected to ④ to this jack. For 

a  mono  audio  signal  (a  single  audio  jack), 

connect it to L(MONO) jack (p.18).

Note: When using AUDIO IN(PC/MIC) 

terminal as MIC input, these terminals can 

be used for PC audio input.