Canon LV-7295 Manuel D'Instructions

0

This projector uses nominal input voltages of 100-40 V 

AC and it automatically selects the correct input voltage. 

It is designed to work with single-phase power systems 

having a grounded neutral conductor. To reduce the risk 

of  electrical  shock,  do  not  plug  into  any  other  type  of 

power system.

If you are not sure of the type of power being supplied, 

consult your authorized dealer or service center.

Connect  the  projector  with  all  peripheral  equipment 

before turning the projector on.



Note:

     Unplug the AC power cord when the projector is not in use.  When this projector  is connected to 

an outlet with the AC power cord, it is in Stand-by mode and consumes a little electric power.

Connect the AC power cord 

(supplied) to the projector.

To the AC outlet.

To power cord 

connector on your 

projector.

To the AC outlet.

To the AC outlet.

Ground

AC power cord must meet requirement of the country where you use the projector.

Confirm the AC plug type with the chart below and proper AC power cord must be used.

If supplied AC power cord does not match your AC outlet, contact your sales dealer.





Ground

The AC outlet must be near this equipment 

and must be easily accessible.

  

Before  using  the AC  Power  Cord,  attach  the  ferrite  core  (supplied)  as  shown  below.  (See  below  for  mounting 

location.)
The Power Cord with ferrite core must be used for RF interference suppression.

0.39" (10 mm)

AC Power Cord

Ferrite Core

Keep closing until it makes  

 a clicking sound.